Usb Device Id Vid 1e3d Pid 198a -

The combination of VID: 1e3d and PID: 198a uniquely identifies a USB device.

Windows has built-in drivers for USB mass-storage devices (USBSTOR.SYS). However, some variants of the CBM2099 require a specific filter driver or a firmware update. If Windows fails to load the generic driver, it will flag the device with Code 28, 31, or 39.

Complete Guide to USB Device ID VID 1E3D PID 198A The hardware ID corresponds specifically to a USB Mass Storage flash drive powered by a Chipsbank Microelectronics Co., Ltd. controller. If your computer flags this ID in Device Manager, you are dealing with a flash drive or micro-SD card reader running a Chipsbank processor—most commonly from the CBM2199 series (such as CBM2199E or CBM2199S) .

If the drive is recognized in Device Manager but has a yellow exclamation mark: Open (devmgmt.msc). Expand Universal Serial Bus controllers . Usb Device Id Vid 1e3d Pid 198a

Windows sometimes cuts power to USB devices erratically:

: Legacy versions of the architecture built strictly for USB 2.0 High-Speed operation. Symptoms of a Failing or Corrupted Chipsbank Drive

Every USB device uses a unique and Product ID (PID) to identify itself to a host computer. The combination of VID: 1e3d and PID: 198a

The Reality of VID 1E3D PID 198A: A Warning on "Fake" Drives

198a identifies the specific product model.

– Assigned to Chipsbank’s high-speed USB 2.0 flash drive controller interface. If Windows fails to load the generic driver,

This code is used across numerous uncertified (white-label) USB flash drives, indicating that while the outside casing and brand name may vary, the internal "engine" of the drive is fundamentally the same.

1E3D Product ID (PID): 198A