Smartctl Open Device Dev Sda Failed Dell Or Megaraid Controller Please Try Adding 39d Megaraid N 39 Extra Quality [exclusive] (No Ads)

: Run smartctl --scan to see if the utility can auto-detect the available physical drive numbers.

This command tells smartctl to use the MegaRAID controller and access disk number 2.

megacli -ldinfo -lall

Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: LSI Model: MR9271-4i Rev: 3.27 Type: Direct-Access Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD5003ABYX-0 Rev: 01.0 Type: Direct-Access Host: scsi3 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD5003ABYX-0 Rev: 01.0 Type: Direct-Access

If you need help corresponds to megaraid,N , I can explain how to use perccli to blink the drive light. : Run smartctl --scan to see if the

After initiating a test, monitor its progress with:

Detection & classification

If you'd like to , I can provide a script that loops through all drives behind the controller. Let me know what you'd like to do next! Share public link