Sc673-10 Ricoh Error !!hot!! -

Locate the access panel for the main controller board (usually at the rear of the machine). Locate the cables routing up to the operation panel.

Always swap out the data cables first, as they are the cheapest point of failure.

Securely plug the cables back into the board and the screen. 4. Clear the SC Error Log sc673-10 ricoh error

Does the screen turn on with a , or does it stay completely black before showing the error?

To prevent communication errors like SC673-10 from recurring, implement these best practices: Locate the access panel for the main controller

The SC673-10 sub-code specifically means that the printer controller failed to establish a connection with the operation panel board within a designated timeframe after power-up. This break in the communication loop prevents the user interface from receiving or sending signals to the main engine. Primary Causes of Ricoh SC673-10

Insert the media into the designated service slot on the controller board or side of the panel. Securely plug the cables back into the board and the screen

In Ricoh’s service language, "SC" stands for Service Call. The code is officially defined as a Control Panel Communication Error at startup.

When servicing the machine, avoid bending the FFC cable sharply. When closing the operation panel, ensure the cable does not get pinched. Use cable clips if provided.