Oneaccess Top — Oneaccess One100 Installation Manual

Connect your ISP line to the appropriate WAN interface (e.g., telephone line to the DSL port, or fiber media converter to the Ethernet WAN port).

Up to 8 FXS ports for analog devices (phones, faxes) or up to 4 BRI ports for ISDN equipment. Console: An RS-232 interface for direct management. 2. Physical Installation Steps Follow these steps to establish physical connections:

The OneAccess One100E Installation Guide suggests configuring the device's IP address and gateway to establish a network connection.

The ONE100 ships with a (e.g., https://top.oneaccess.net/cpe ). Upon first WAN connectivity, it attempts to register using its unique serial number. oneaccess one100 installation manual oneaccess top

Confirm “Are you sure?” → . The device will reboot to default settings (192.168.1.1, admin/admin).

Verify that your shipment includes the following standard items: OneAccess ONE100 multi-service router AC power adapter and cable RJ-45 console cable Ethernet network cable Printed quick start guide or compliance documentation Environmental Requirements

An RJ-45 serial port used for local command-line interface (CLI) administration. Connect your ISP line to the appropriate WAN interface (e

Always change the default passwords during first login. Use the command: # passwd admin

Router(config)# exit Router# copy running-config startup-config Use code with caution. 6. Verification and Troubleshooting

> enable Password: <admin-password> #

Connect the Ethernet ports to your LAN switches or routers.

(config-if)# ip address 203.0.113.10 255.255.255.0 (config-if)# ip default-gateway 203.0.113.1