L2TP/IPsec is actually two protocols. IPsec handles the encryption. Let's define a modern, secure proposal (AES-256 with SHA256).
First, we need to define a range of IP addresses that will be assigned to remote clients when they connect. Go to > Pool . Click + to add a new pool. Name: vpn-pool
If you are following a tutorial, ensure it covers: mikrotik l2tp server setup full
/interface l2tp-server server set enabled=yes max-mtu=1450 max-mru=1450 default-profile=l2tp-vpn-profile authentication=mschap2 use-ipsec=yes ipsec-secret=SuperSecretIPsecKey987! Use code with caution. Step 5: Configure the Firewall to Allow VPN Traffic
First, define a range of IP addresses that will be assigned to your remote VPN clients. to add a new pool. 192.168.89.10-192.168.89.50 (Ensure this subnet does not conflict with your local LAN). 2. Configure the PPP Profile L2TP/IPsec is actually two protocols
This comprehensive guide provides a full, step-by-step walkthrough to set up a MikroTik L2TP/IPsec VPN Server Go to product viewer dialog for this item. , ensuring secure remote access to your network. MikroTik L2TP Server Setup: A Full Step-by-Step Guide
/ppp secret add name=remoteuser password=UserSecurePass987! service=l2tp profile=l2tp-profile Use code with caution. 6. Step 5: Configure Firewall Rules First, we need to define a range of
Click , then drag this rule up so it sits above any generic drop rules in your input chain. Next, allow the ESP protocol: Click + to add another rule: Chain: input Protocol: 50 (ipsec-esp) In. Interface: Select your WAN interface. Switch to the Action tab: Action: accept Click OK and move it above the drop rules. Via Command Line (CLI):
The PPP profile defines the network settings for the VPN clients, including the local IP (gateway) and the remote IP pool. Go to -> Profiles . Click + (Add) . Name : l2tp-profile