Connect a new wire from on the timer to the input side of your external geyser isolator switch.
A: Yes. Simply leave R1/R2 disconnected. The timer will still function as a standard programmable timer based on your ON/OFF events.
Ensure the main circuit breaker feeding the timer is turned ON. Let the unit charge for 15 to 30 minutes, then press the Reset pinhole button to clear the memory and reboot the CPU. 2. The Geyser Turns On at the Wrong Times
Rated for a maximum resistive load of 20A (approx. 4600W at 230V). kes geyser load control timer manual new
To ensure the "Peak Time Lockout" works correctly, your timer’s Real Time Clock (RTC) must be accurate. buttons together.
The geyser is OFF during specific blocks: 00:00–03:00, 08:00–15:00, 20:00–24:00, and during standard weekday peak times. Manual Features & Indicators
To sync the timer with your local time, follow these steps exactly: Connect a new wire from on the timer
System clock is inaccurate or configured for AM instead of PM.
Connect the Live incoming feed from the geyser circuit breaker to Terminal 1 . Connect the Neutral incoming wire to Terminal 2 . (Note: Check your specific casing layout, as some newer iterations swap terminal configurations. Always match Live to 'L' and Neutral to 'N').
🔗 [Link to Manual/PDF if available] 💡 Pro-tip: Check the "Load Limit" settings in the new guide to prevent tripping breakers during power restoration. The timer will still function as a standard
Before installing or operating your device, familiarize yourself with its technical limits and physical interface. Technical Specifications 220V - 240V AC, 50Hz Maximum Current Capacity: 30A (Resistive load) Maximum Power Rating: Up to 4000W geyser elements
Identify the exact for your specific region. Compare this model with WiFi-enabled geyser controllers .
The AM/PM or 24-hour clock setting is mismatched, or the day blocks were set incorrectly.