: Connect the smaller "L-shaped" cable to the drive and the other end to an open SATA port on your motherboard. For a primary boot drive, use the port labeled SATA0 or SATA1 .
Flex the plastic tray slightly and align the pins on the tray sides with the screw holes on the sides of your 3.5-inch hard drive. Ensure the connectors face toward the back of the tray.
Step-by-step installation (methodical, with checks)
Adding a Serial ATA (SATA) hard drive is one of the easiest ways to upgrade your computer's storage capacity. Whether you are adding a secondary drive for extra games or replacing an old boot drive, the physical installation process follows a standard set of steps. installing a sata hard drive top
Squeeze the tabs on an empty drive tray inside the drive cage and pull it out.
Scroll down the bottom half of the window to find your unallocated space (marked with a black bar). Right-click the unallocated space and select New Simple Volume . Follow the Wizard: Size: Leave it at default to use the maximum capacity. Drive Letter: Assign any available letter (like D: or E:). File System: Select NTFS for internal Windows storage. Allocation Unit Size: Leave as Default.
With the drive securely mounted and connected, it is time to close up the system. : Connect the smaller "L-shaped" cable to the
Depending on your case design, use one of the following methods:
Once the hardware is installed and the PC is powered on, the drive will not show up in File Explorer until it is initialized. How to Install a Hard Drive or SSD in a PC
Leave this at the default maximum value if you want to use the entire drive as a single storage pool. Click Next . Ensure the connectors face toward the back of the tray
A wide, flat power plug originating from your computer’s Power Supply Unit (PSU).
To ensure your storage expansion perfectly fits your specific rig, could you tell me: