Harvey Hv3 Water Softener Installation Manual -

Ensure the bypass valve levers are set to the "Bypass" position (water flows through the plumbing but bypasses the softener).

This guide provides a comprehensive overview of the installation process to ensure your system runs efficiently from day one. 1. Pre-Installation Checklist harvey hv3 water softener installation manual

The brine tank is used to store salt, which is used to regenerate the resin in the water softener system. To install the brine tank, follow these steps: Ensure the bypass valve levers are set to

Close the lid. The system will now automatically use this salt to regenerate its cylinders as needed. 🔍 Troubleshooting Initial Startup Pre-Installation Checklist The brine tank is used to

With the bypass and outlet valves closed, slowly open the inlet valve. Open the outlet valve and a nearby soft water tap for a few minutes to flush the pipework and check for leaks. Manual Fill:

: For pre-November 2020 Harvey HV3 models, you can check how much salt is in your salt compartment just by looking through the clear window on the front of the cabinet. As a general guideline, allow one salt block per household member per month, though this can vary based on your water hardness and usage patterns.