If password generators fail and default credentials do not work, you must perform a hardware reset. This will wipe the current administrative password and restore the DVR to its factory settings (note: this will delete the footage stored on your hard drive, but it will erase your network and viewing configurations). Method A: The Internal Battery Reset (Most Common) Disconnect the DVR completely from the power source. Carefully unscrew and remove the top cover of the DVR box.
Change the default HTTP port ( 80 ) and Media port ( 34567 or 8000 ) to custom random numbers to hide your device from automated network scanners.
This is usually a security feature that triggers after multiple failed login attempts. Try waiting 15-30 minutes for the lock to expire. If that fails, power cycle the DVR (unplug it, wait 30 seconds, and plug it back in). If you are still locked out, you may need to perform a factory reset or contact your manufacturer for a master unlock code. h264 dvr login password
/ 111111 : Often used for 8 or 16-channel generic systems.
Keep the pins shorted for until you hear a prolonged beep or see the system reboot. If password generators fail and default credentials do
A: Contact the manufacturer’s technical support or an authorized service center. They can generate a master password based on your device’s serial number.
If physical access to the monitor is inconvenient, software utilities can probe the device over a Local Area Network (ONVIF/IP network). Method A: Using a Device Config Tool Carefully unscrew and remove the top cover of the DVR box
If the DVR prompts you to install a plugin via Internet Explorer (ActiveX), the default password usually works on the local monitor (VGA/HDMI out) even if the network login is blocked.
Unscrew the outer casing and locate the main printed circuit board (PCB).
Note the exact shown on your DVR screen.
If the defaults do not work, your DVR likely requires a dynamic "Super Password." This is a temporary master password generated based on the current date displayed on your DVR monitor screen. How to Use a Master Password Generator