Use the Bank Up/Down buttons to select one of the 30 available banks.
Creating a custom look is a straightforward process once you know the sequence: Enter Program Mode: Press and hold the button until the LED indicator flashes. Select Your Fixture: Press the numbered button (e.g., P1) for the light you want to adjust. Set the Look:
Press and hold the and Bank Down buttons simultaneously. Turn the power switch back on while holding both buttons.
: Move the faders (CH1–CH16) to adjust specific functions like color, strobe, or dimmer. disco 240 dmx controller manual
This comprehensive guide serves as your complete manual. It covers everything from basic setup to advanced programming techniques. 1. Hardware Overview and Layout
: Only use cables specifically rated for DMX signal (110–120 ohm) rather than standard microphone cables to ensure reliability in high-stakes environments.
To control fixtures independently, you must assign a unique starting DMX address to each light. The Disco 240 allocates 20 channels per fixture button. Set the digital displays or dip switches on your lights according to this map: Address 1 Fixture 2: Address 21 Fixture 3: Address 41 Fixture 4: Address 61 Fixture 5: Address 81 Fixture 6: Address 101 Fixture 7: Address 121 Fixture 8: Address 141 Fixture 9: Address 161 Fixture 10: Address 181 Fixture 11: Address 201 Fixture 12: Address 221 4. Manual Operation Mode Use the Bank Up/Down buttons to select one
This manual is reproduced from the original technical documentation for educational and reference use. The "Disco 240" is also sold under names like Showtec DMX 240 , Omnitronic DMX-240 , and Chauvet DMX-240 with identical operation.
Moving beyond basic setup, the essay of the manual progresses into the operational mechanics, specifically focusing on the manipulation of "intelligent" fixtures. Unlike traditional dimmer packs which merely control brightness, the Disco 240 is designed to handle moving head lights and scanners. The manual guides the user through the complex process of fixture selection and channel assignment. It explains how to allocate the specific number of channels required for each light—whether it is a simple 4-channel par can or a complex 16-channel moving head. This section of the manual is often the most challenging for users, as it requires a conceptual shift from controlling a single light to managing a network of devices. The manual acts as a translator, helping the user understand that pressing a button on the console sends a specific digital signal that tells a motor to pan, tilt, or change color.
Press and hold the Program button for 3 seconds to exit. 4. Programming Chases (Sequences) Set the Look: Press and hold the and
Page 41 (DMX addressing): “Address 127 is cursed. Use it only if you want the moving heads to weep.”
Press the "Program" button (usually held for 3 seconds) and select a bank/scene slot to save.
The Disco 240 is a workhorse for mobile DJs, small clubs, and stage productions. By mastering the 20-channel fixture allocation and the scene-to-chase workflow, you can create professional-grade light shows with ease.
The Disco 240 DMX controller is a versatile, entry-level light board designed for DJs, event planners, and small entertainment venues. It bridges the gap between basic 192-channel controllers and complex computerized lighting software. This comprehensive guide serves as your operational manual to master the setup, patching, programming, and execution of light shows using the Disco 240. Technical Specifications and Layout Overview
.jpg)
.png)