Dc-unlocker Commands List High Quality Online

AT+ZCDRUN=8 — Disables the virtual CD-ROM installer driver, forcing the device directly into modem/diagnostic port mode.

: Toggles the full phone functionality mode, forcing a soft power cycle on the cellular radio module.

: Queries the network lock state specifically on Huawei modems. It outputs three values (e.g., 2,10,0 ). The first digit indicates lock status ( 2 means locked, 1 means unlocked). The second digit indicates remaining unlock attempts. dc-unlocker commands list

: Displays manufacturer information, model name, and firmware version.

AT+CFUN=1,1 — Restarts the modem completely. This is a soft reset. It outputs three values (e

: Unlocks the device's data protection, which is often required before executing other sensitive service commands. AT^U2DIAG=255

: These are used to determine which parameters a specific modem supports. For instance, ATD=? checks if the device supports dialing functionality. : Unlocks the device's data protection

– Enables administrative access to execute engineering commands.

: Reads non-volatile memory (used for backup) 1.2.2.

To get the most out of DC-Unlocker, you need to understand the various commands and options available. Here's a detailed DC-Unlocker commands list to help you get started:

: Measures Signal Quality. It returns two numbers; the first indicates the Received Signal Strength Indicator (RSSI), ranging from 0 to 31 (higher is better).