Caraflo V200 Shower Instructions Jun 2026

to remove debris before fitting the mixer to prevent damage to the thermostatic valve. Leisure Parts 4U Operating Specifications Temperature Range Hot supply: Cold supply: Water Pressure : Recommended operating pressure is between 0.5 and 5 bar Static Caravan Spares Maintenance & Seal Replacement

| Component | Action | |-----------|--------| | | Rub silicone nozzles with finger to remove limescale | | Hand shower face | Unscrew and soak in vinegar/descaler if blocked | | Chrome finish | Wipe with soft cloth & soapy water (no abrasive cleaners) | | Cartridge (if dripping) | Call a plumber; requires removing the thermostatic cartridge |

Typically manufactured from solid brass with a polished chrome finish and a ceramic disc cartridge for longevity. Operating Instructions

Screw your standard flexible shower hose onto the central 1/2" BSP bottom outlet. Operating Instructions caraflo v200 shower instructions

Water too cold or too hot / temperature fluctuates

Turn the designated handle (often the right or bottom handle, depending on orientation) toward you to increase water flow and away from you to turn it off.

Caraflo V200 is a thermostatic shower mixer valve primarily used in static caravans and holiday homes to remove debris before fitting the mixer to

Flush both hot and cold feed pipes thoroughly to remove any construction debris, solder flux, or limescale before mounting the valve. Step-by-Step Installation Instructions Step 1: Preparing the Wall and Fixing Brackets

If your caravan‘s water system has been isolated (for example, after a period of non‑use), ensure the hot and cold mains feed taps are fully open before you begin.

Sarah felt refreshed and rejuvenated after her shower with the Caraflo V200. She was impressed by the ease of use, comfortable water temperature, and luxurious shower experience. From now on, she looked forward to enjoying many more refreshing showers with her new V200. Operating Instructions Water too cold or too hot

Before beginning, ensure your vehicle's water system matches the requirements of the valve: 0.5 bar Maximum Operating Pressure: 5.0 bar

Open every tap inside the caravan to allow air into the plumbing grid.

Ensure the hot supply line connects to the hot inlet (typically marked with a red indicator).

The official instruction manual states that as a TMV2-approved valve, the Caraflo V200 should be tested against its original set temperature results at least once a year by a competent person.

Before beginning installation, verify your existing layout matches the structural dimensions of the V200. This unit features full for optimal anti-scald protection. Specification Pipe Centres Spacing 45mm (Hole centres) Orientation Horizontal or Vertical installation Cartridge Style Screw-in Plastic Nylon with Vernet 0847 copper thermostat Tail Dimensions 45mm length x 20mm outlet diameter Physical Dimensions Height: 165mm (vertical) Compatible Pods Plast-Tech, Bridgewood, and Lamplas shower cubicles ⚙️ Step-by-Step Installation Instructions